Telemirror
New member
I decided to play around with/upgrade an unused mini amp (Joyo JA-02 https://a.co/d/5lYJb8Q) that I had. After removing the 8ohm/1w speaker from the original amp, I wanted to try two speakers to fit into a project I’m working on.
I picked up two 4ohm/3w speakers, and after wiring them in series, there is no sound coming from the speakers. The amp powers on and lights up (the OD channel clipping diodes even light up with signal, but zero sound.
The amp itself is 3w, so I figured that I would get a 50% output reduction from both speakers.
Recap:
Amp - 8ohm/3w
Original Speaker - 8ohm/1w
New Speakers in Series - 4ohm/3w
Any guidance is greatly appreciated! (Pics attached)
I picked up two 4ohm/3w speakers, and after wiring them in series, there is no sound coming from the speakers. The amp powers on and lights up (the OD channel clipping diodes even light up with signal, but zero sound.
The amp itself is 3w, so I figured that I would get a 50% output reduction from both speakers.
Recap:
Amp - 8ohm/3w
Original Speaker - 8ohm/1w
New Speakers in Series - 4ohm/3w
Any guidance is greatly appreciated! (Pics attached)