A AK7IN New member Apr 10, 2021 #1 Is the toggle switch a spst on-off or a spdt on-on? Looking at the schematic it looks to be a SPST ON-OFF but they only have 2 lugs.
Is the toggle switch a spst on-off or a spdt on-on? Looking at the schematic it looks to be a SPST ON-OFF but they only have 2 lugs.
Mcknib Well-known member Apr 10, 2021 #2 Looks like an SPST would do, it just switches in C3 for more bass like a fat switch don't think it matters one lugs unconnected you could use either type Last edited: Apr 10, 2021 Upvote 0 Downvote
Looks like an SPST would do, it just switches in C3 for more bass like a fat switch don't think it matters one lugs unconnected you could use either type
Chuck D. Bones Circuit Wizard Apr 11, 2021 #3 If you use a SPST switch with only two lugs, just make sure that hole closest to the edge of the board is the empty hole. Upvote 0 Downvote
If you use a SPST switch with only two lugs, just make sure that hole closest to the edge of the board is the empty hole.
