SOLVED Twin Face no voltage PNP side

[grant1r]

Hello,

I recently assembled a Twin Face pcb. The silicon side works. However, the germanium pnp side is not working. Upon troubleshooting, I noticed that while pin 5 on TC1044 gives me -8.9V, there is no voltage going to R1 or R3. I am not sure how the pcb traces from pin 5 to R1? Any help would be greatly appreciated, thanks.

 

[Nostradoomus]

sounds like you have a 470k where a 470r should be

 

[grant1r]

sounds like you have a 470k where a 470r should be

Thanks for your reply. I will check it out. I ran a jumper from pin 5 to R1 and the circuit works. Thanks!