What's in the mailbox? 📬 📦
- Thread starter Harry Klippton
- Start date
fig
Village Idiot
Gives a whole new meaning to the term "Moon landing".
Last edited:
Fama
Well-known member
Moonn order arrived here too, although much smaller. Drömtydning, Piper at the Gates of Dawn and Sojus 31, plus apparently an extra Aglio e Olio. A small hand drill from Aliexpress also arrived - I'm hoping I can use it to cut veroboard tracks, but even the largest bit might be too small. It was 3.50€ so not a huge loss if it won't work well.
Erik S
Well-known member
Not sure how they work for PCBs but I used one of those last week to clean out the holes on a shower head clogged with hard water deposits. Worked great for that.
Laundryroom David
Keyboard Cowboy ðŸ¤
Diodes from Odesa, Ukraine, for upcoming Muffapalooza
Phil hodson
Well-known member
Finally got round to designing my own Tayda UV prints. And not stealing them from other people 
Wow it’s a learning curve that’s for sure. But I’m very happy with how they turned out.
Will have to try more to get more confident with it.
Basic design for the hyper fuzz and I went for the black on black for the Fordoble.
Many thanks to @KR Sound and @Fingolfen and @Guardians of the analog for their help and tutorials, without which I wouldn’t have got this far.
Also the pages and pages of comments on the process on this forum too.
Now I just have to go and finish the circuits and drill and box them up!
Wow it’s a learning curve that’s for sure. But I’m very happy with how they turned out.
Will have to try more to get more confident with it.
Basic design for the hyper fuzz and I went for the black on black for the Fordoble.
Many thanks to @KR Sound and @Fingolfen and @Guardians of the analog for their help and tutorials, without which I wouldn’t have got this far.
Also the pages and pages of comments on the process on this forum too.
Now I just have to go and finish the circuits and drill and box them up!
Attachments
Harry Klippton
Not Interested
Good mail day for me
benny_profane
Well-known member
@Harry Klippton - Is that a Boris - Pink deluxe edition?
Harry Klippton
Not Interested
It is indeed
Feral Feline
Well-known member
I use a similar hand-drill with various bit-sizes to clear PCB-pads of stubborn solder that copper-braid and solder-pump can’t get out — like when a wire breaks off and I need to remove small strands to unblock the hole for a fresh attempt at the wire, etc.
vigilante398
Authorized Vendor
I had been wanting to replace my 3D printed strat body for a while, so when the epoxy holding it together failed I was able to rationalize pulling the trigger on this.
DeadAirMD
Well-known member
That hand drill is an awesome idea for vero! I have a huge pile of PCBs I'm working through before I start on some vero projects. Going to make Jimi Photon's 1st Juergulator for my uncle and one for myself. Obsessed with the harmonic percolator.
Mentaltossflycoon
Well-known member
I received a big ol chunk of generosity from @Guardians of the analog Thanks a ton, Chris! Now I gotta build these up cleaner than usual. No pressure.
Unrelated, a small order arrived from Moonn... two split and blends and a lizard queen I didn't order. I barely drink and if i had drunk purchased a pcb, the lizard would not have been it
. I know he went through a bit of a rough patch earlier this year and I'm guessing these were meant for another customer. Oops? looks like I am going to build an escobe.... cough, I mean ljzard queen. Just when I was getting out of the spite build game, too.
Unrelated, a small order arrived from Moonn... two split and blends and a lizard queen I didn't order. I barely drink and if i had drunk purchased a pcb, the lizard would not have been it
. I know he went through a bit of a rough patch earlier this year and I'm guessing these were meant for another customer. Oops? looks like I am going to build an escobe.... cough, I mean ljzard queen. Just when I was getting out of the spite build game, too.
drgonzo1969
Well-known member
I think moonn just adds a free board with most orders these days. I got freebies with both of my last moonn orders.I received a big ol chunk of generosity from @Guardians of the analog Thanks a ton, Chris! Now I gotta build these up cleaner than usual. No pressure.
Unrelated, a small order arrived from Moonn... two split and blends and a lizard queen I didn't order. I barely drink and if i had drunk purchased a pcb, the lizard would not have been it
View attachment 57245
Mentaltossflycoon
Well-known member
Even with a freebie ljzard, that means I would have placed an order for just 2 split and blends to be shipped to Oregon.....? It's possible that I added those to a past order that I've since forgotten about and then he sent them months late with a ljizard.
Moonn has thrown in a bunch of freebies in with my orders so that part definitely tracks.
drgonzo1969
Well-known member
hahaha ooohhh ok ya thats a little wild. hahaha
drgonzo1969
Well-known member
maybe you won a contest that you didnt know you entered.... congratulations?
Harry Klippton
Not Interested
This sick sad wings of destiny bootleg shirt I forgot I pre-ordered months ago, and some friends sent us their old projector cuz they got a fancy one
KR Sound
Well-known member
That's awesome- I need that as a t-shirt!I received a big ol chunk of generosity from @Guardians of the analog Thanks a ton, Chris! Now I gotta build these up cleaner than usual. No pressure.
Unrelated, a small order arrived from Moonn... two split and blends and a lizard queen I didn't order. I barely drink and if i had drunk purchased a pcb, the lizard would not have been it
View attachment 57245
