What's in the mailbox? 📬 📦
- Thread starter Harry Klippton
- Start date
giovanni
Well-known member
Got some certified organic, home made inductor from @Stickman393 and equally certified organic and home made sticker labels from @Ginsly! Thank you both for the freebies guys!
drgonzo1969
Well-known member
Have you tried bending the legs of some tube sockets to make it work? What circuit is it?
Asdrael
Well-known member
Bending would work. But the legs are too thick for the holes too and I can’t redrill without making the pads too thin for the voltage and current they’ll see. Hoh well. I’ll take the opportunity to make the small resistor pads bigger because as they are I will have to use a very thin iron and it won’t be fun I fear. Lesson learn. But hey. Grand total was below 40€ so better now than assembled! I am also triple checking the spacings since I have the components here.
As for the circuit it’s a modified Deliverance 60. Basically made it fully two channels.
finebyfine
Well-known member
Love the heatsink footprints
Asdrael
Well-known member
Thanks but I can’t take credit for this. I am using Fusion and there are so many libraries I just found the right one.Love the heatsink footprints
vigilante398
Authorized Vendor
I don't buy pedals very often as I can make most things I need, but sometimes I'm impressed enough by someone's work that I want to pick something up just to keep in the collection. Recently I discovered 6 Degrees FX, and this showed up today. Unassuming and unremarkable on the outside, but the guts are what counts.
MichaelW
Well-known member
How does it sound?
drgonzo1969
Well-known member
They should change their from 6 degrees to 6 to midnight degrees. Hehe
vigilante398
Authorized Vendor
I'm not really a TS person and it's basically just a really nice TS808, but as far as TS808s go I would say it sounds very good.
I also grabbed their Rat (out for delivery this evening), Bluesbreaker, and their original preamp. They're really well designed and well built, but I guess they never really caught on, prices are deceptively reasonable for them online.
Silver Blues
Well-known member
Those guys have amazing craftsmanship. I really like their Millie fuzzstortion (cough @Robert cough)
EisengesisFX
Well-known member
Latest Love My Switches order just arrived. It's really, really nice having them one state over. Some of the knobs are for builds I'm finishing up, the enclosures are all for future ones. The most immediate of the latter is a mini Fuzz Face I'll be putting in one of the red 1590As.
The lil' kit is a CV expansion mod for Gehirn Enterprises Noiswasp (4ms NoiseSwash clone) I built recently.
Isabelle's feelings on the matter are...predictable
The lil' kit is a CV expansion mod for Gehirn Enterprises Noiswasp (4ms NoiseSwash clone) I built recently.
Isabelle's feelings on the matter are...predictable
jessenator
Well-known member
Hopefully it all works when assembled…
Like, man how hard is it to just throw in some bolstering material in there?
The motor section doesn't look damaged or anything. Can't look closer to this evening.
Like, man how hard is it to just throw in some bolstering material in there?The motor section doesn't look damaged or anything. Can't look closer to this evening.
MichaelW
Well-known member
Not enough hyperbolic marketing schpiel......
Feral Feline
Well-known member
andare
Well-known member
We are Screech brothers. Isn't it the cleanest octave ever?
andare
Well-known member
Ooh mama. @vigilante398 knocked it out of the park. With a 12AX7 this is a monster.
His neighbor is an unassuming Musikding Phase 95 that works just right for bass. My first ever build iirc.
