pbrommer
Well-known member
Welp, now I need to order another enclosure for another project that’s on the list (or will be on the list).
Those glow in the dark are sweet.
What’s on *YOUR* workbench?
- Thread starter Bricksnbeatles
- Start date
Those glow in the dark are sweet.
Harry Klippton
Not Interested
Trying to figure out my snake needs. I'm not gonna like this much
Paradox916
Well-known member
I’m not totally sure I understand what’s going on there but it looks like fun
Harry Klippton
Not Interested
Mixing board into patch bay and 3 different tape machines in and out to the patch bay
JasonWickersham
Well-known member
Wrapped up a GuitarPCB dual tube screaming preamp build. Added the Toto tone boards to swap diodes. D9J, BAT41, 3mm yellow led, and 1n914.
Yes it’s messy.
Sounds good, and glad I was talked into using some tip switched jacks to allow an insertion point between each node.
Yes it’s messy.
Sounds good, and glad I was talked into using some tip switched jacks to allow an insertion point between each node.
Attachments
Aleph Null
Well-known member
Does the world need a six-knob Harmonic Percolator? I don't know, but it's going to get one!
tegendemuur
Well-known member
Tilting is not enough! As inspired by Bob Burt's V cabinets (subtle outwards), and the Beta Lead combo (extreme inwards), I made these angled discs that can be flipped in four directions via the mounting screws. These are angled at approx 7 degrees (I still need to smooth them out via the router... Ugh)
Too bad these Fender mounting screws are just a few mm too short, so I'll either have to get some screw extentions. or sink them a bit into the baffle.
Too bad these Fender mounting screws are just a few mm too short, so I'll either have to get some screw extentions. or sink them a bit into the baffle.
Last edited:
gonzo
Well-known member
Finally finished this kit up. Lots of mistakes I had to fix on it, but it turned out ok. Only a little weird black paint headstock shrinkage reaction. Maybe the grain filler underneath and not enough coats, or the clear coat shrank it. I've wanted one of these since my twenties. Got a mojo pickup in it from the UK. (Edit: I should note I experimented with milk paint and all nontoxic paints for this.)
Last edited:
Feral Feline
Well-known member
What's on my workbench?
Yet another pedal-build that doesn't work.
Yet another pedal-build that doesn't work.
the worst feelingWhat's on my workbench?
Yet another pedal-build that doesn't work.
Feral Feline
Well-known member
Composter, made entirely from scrap materials, is finally done and receiving its first inspection.
Fama
Well-known member
Populated a total of 7 boards in preparation for my upcoming enclosure order. I quite like this workflow where I do a bunch of boards at the same time, first resistors for all, then caps, then the rest, and finally for boxing just add pots and wiring (and LEDs/CLR's). Much nicer (for me) than doing everything in one go before boxing.
PunchySunshine
Well-known member
I've started using those Ethernet to XLR adapters from Dave Rat. I can get away with using the Aliexpress versions if it's only dynamic mics or line level but I've got to use his Sound Tools expensive ass version if I need phantom power for the condenser mics.
vigilante398
Authorized Vendor
Been there x100000000000What's on my workbench?
Yet another pedal-build that doesn't work.
The good news is no matter how many pedals you build successfully (I'm probably around 5k or so by now), there will always be some that don't work. Keeps us humble I guess.
jessenator
Well-known member
As far as my bench, it's got stuff, but I haven't had much time. New 9–5 is taking up some motivation juice, but I'm just glad I have one in this market.
Did upgrade my PC's SSD because the VHS digitization… I mean once I edit the family memories down (and save the wicked rad commercials), it'll be less space, but want to make sure I don't miss anything. So even if the SLP tape has 10–20 minutes of family shenanigans and both Splash and Roxanne, I let it all record just in case.
Got a crash course in clonezilla and netbootin, because migration of Linux was out of my wheelhouse. The swap partition was in the way of resizing the primary boot, and gparted broke the swap partition move… anyway it's sorted, but thing is I know just enough to do some serious damage but not enough to fix it without help. Such is the non Windows or macOS life.
Did upgrade my PC's SSD because the VHS digitization… I mean once I edit the family memories down (and save the wicked rad commercials), it'll be less space, but want to make sure I don't miss anything. So even if the SLP tape has 10–20 minutes of family shenanigans and both Splash and Roxanne, I let it all record just in case.
Got a crash course in clonezilla and netbootin, because migration of Linux was out of my wheelhouse. The swap partition was in the way of resizing the primary boot, and gparted broke the swap partition move… anyway it's sorted, but thing is I know just enough to do some serious damage but not enough to fix it without help. Such is the non Windows or macOS life.
jimilee
Well-known member
Right! Then we gotta figure out if the mistake is in the build or the schematic.
vigilante398
Authorized Vendor
Yuck, I hate that part.
CheapSuitG
The TubeSchemer
YAPBTDW?What's on my workbench?
Yet another pedal-build that doesn't work.