That's why you get paid the big bucks.
Thanks!
I have four of these PCBs. This is saving me from buying another Strymon Ojai, but even better with 4 of these no more power split cords at all
Last edited:
Missing Build Docs / Schematics
- Thread starter Robert
- Start date
That's why you get paid the big bucks.
Thanks!
I have four of these PCBs. This is saving me from buying another Strymon Ojai, but even better with 4 of these no more power split cords at all
Are there any cheap options you know of for the dc/dc converters that output more mA ? I was planning on having one or two bigger taps
Robert
Reverse Engineer
The only ones I've tried are the XP Power 1W, 2W, and 3W versions.
The DC/DC converters have electrically isolated outputs and the DC jacks don't share a common ground.
I was planning on getting these since they provide more ma (says 333ma) and are in stock. In a previous thread you mentioned using the 12v version (305s12). Since I'm looking for 9v operation I'm assuming these are what I'd need with the l78l05cv?
Robert
Reverse Engineer
12V for the USB Power Converter (This is filtered / regulated down to 9V)
9V for the 4-Tap Isolator
The USB Power Converter has an additional stage of regulation/filtering to make up for noisy computer power supplies.
The next restock of the 4-Tap Isolator will possibly add some additional regulation as well, and if so that will require the 12V DC/DC converter to make up for the dropout voltage of the regulators.
Not there yet, but any chance you have the drill templates ? What height of standoff are you using in general for those ?
Robert
Reverse Engineer
Is there a existing build doc with a drill template that would work for the Scabbard?
It's a good one
This is only for the current (Rev1) PCB. The pots will be brought in closer to the center in the next revision/restock.
chris.knudson
Well-known member
Did you ever post the drill template for these?
Will the schem/comprehensive build doc be posted with the next revision/restock?
Robert
Reverse Engineer
I thought you were talking about the Comprehensive Drive. I was like "Huh? It's already up".
It's on my list, just a few head of it.
Leftovernoise
Active member
Looking for the build doc for the akronym or at least the bill of parts so I can get some parts organized. Thanks
PangeaDestructor
Active member
Two Tone Fuzz, other than the two toggles, is it a standard PPCB 4 knob drill template?
Robert
Reverse Engineer
The pots are spaced further apart. I believe the closest existing template is the Crunch Captain Deluxe, omitting the center column of pots.
Fama
Well-known member
So the rev 1 is not an existing drill template either (well, I'm more interested in the Tayda options, but same thing really)?
