Jovi Bon Kenobi
Well-known member
This is an awesome Rat variant! Again, I took the advice of the friendly folks here and built this. So glad I did. It rules! Best. Rat. Ever!
The mod I did is courtesy of Chuck D Bones with help from Hamish. Photos of mod below.
What I had in a baggie labeled "LM308N" was actually UA308HC so I used those. Getting em into the sockets was a bitch. Ha. I also socketed the diodes to eventually play around with variants.
I always have a hard time coming up with label ideas for toggle switches but in this case I did something a little different. I tried coming up with a word that had c, o, d, and e so I could label it vertically and spell out what each of the switching variants do (with arrows to make it easier for me to understand). Hence, CODEX. Knobs from LMS. P-Touch gold on clear labels. Font is called Mekon.
Here's the mod from Chuck D. Bones. I also added a 430nF cap in C13 because Hamish did and I do whatever he does.
Then I added some heat shrink to protect it from shorting
The mod I did is courtesy of Chuck D Bones with help from Hamish. Photos of mod below.
What I had in a baggie labeled "LM308N" was actually UA308HC so I used those. Getting em into the sockets was a bitch. Ha. I also socketed the diodes to eventually play around with variants.
I always have a hard time coming up with label ideas for toggle switches but in this case I did something a little different. I tried coming up with a word that had c, o, d, and e so I could label it vertically and spell out what each of the switching variants do (with arrows to make it easier for me to understand). Hence, CODEX. Knobs from LMS. P-Touch gold on clear labels. Font is called Mekon.
![IMG_20201010_182344.jpg IMG_20201010_182344.jpg](https://forum.pedalpcb.com/data/attachments/6/6915-019d2214aedfb6e4c89e1e9ebac9d994.jpg)
![IMG_20201010_145002.jpg IMG_20201010_145002.jpg](https://forum.pedalpcb.com/data/attachments/6/6916-38c73268dd4a033b964e6b7cc99b14b2.jpg)
Here's the mod from Chuck D. Bones. I also added a 430nF cap in C13 because Hamish did and I do whatever he does.
![Expandora bass pot.png Expandora bass pot.png](https://forum.pedalpcb.com/data/attachments/6/6917-0e82f440b37ae78a33e936f812eaf5cc.jpg)
![IMG_20201010_115229.jpg IMG_20201010_115229.jpg](https://forum.pedalpcb.com/data/attachments/6/6918-158ebf7d6132436ed3ebcc1968477c2d.jpg)
Then I added some heat shrink to protect it from shorting
![IMG_20201010_120436.jpg IMG_20201010_120436.jpg](https://forum.pedalpcb.com/data/attachments/6/6919-67152c4817de833d18b330bec1cd152f.jpg)
Last edited: