Search results

I have an old pdf saved in my Tayda Drill Box that I'm trying to use for a recent order, have the svg file around somewhere. I canceled my Adobe Illustrator account because I wasn't using it enough. The file I'm trying to use for Tayda has a gloss layer, but I didn't order gloss service so it...

I have the micro addition boost, really nice clean boost but I'm wondering if there's a way to make it grit up a little more without pissing off my neighbors too much. I've got a spare Trimmit board around somewhere, is there a spot I could drop that in to make it dirtier? I'm looking at the...

My pharmacist build is working and sounds great, but I'm a little disappointed by the volume control, hoping to get some more mileage out of the first 50% on that pot. I know it's not supposed to be super loud without things cranked but unless the gain is at noon, the volume is well below unity...

Haven't had an LED issue in a long time. Got my pharmacist all populated, tested it, soldered in the LEDs and while the boost side works normally, the bypass side doesn't light up. Treble and bass trimmers are wired up as normal pots. I've been poking around for continuity on the LED side, and...

Before I pull this pain in the butt back out of the enclosure and post pics, I'm just wondering if there is anything in the schematic itself that would be the likely culprit here. Everything is working great on my most recent build of this, except for one thing - with the EP in front of the OCD...

I really should buy two boards when I'm going to try something new with the circuit. Wanted to build a Green Russian with the intent of a 2-in-1 with the squidward. Why not add a Hoof-style Shift control while I'm at it. I wired lug 3 of a b50k pot to the live pad on r18, bridged lugs 1/2...

I'm doing a Muffin Fuzz with a Squidward for an additional octave, and was planning to add the Shift control from the Hoof/Ungula. Seems like an easy mod, but wanted to check before doing this - solder lug 3 of a B25k pot to the first pad of R18, bridge lugs 1/2 of the pot, then solder one leg...

Hey all, got the Cobbler put together and trying to troubleshoot it. No output from the pedal, with the audio probe I'm getting no signal coming from pin 1 of IC1. I wasn't paying attention and somehow dropped an OPA2134 in for IC1, is that a critical error or just a $6 oops? Voltages are...

I see spaces where it looks like either can be used. I have the film caps on hand, need to buy electrolytics if I use those. Is there any reason to choose one over the other in this circuit, what's the reasoning behind this?

Hey All, finally got my Electrovibe all populated, may have boxed it too soon. Pardon the flux, I'm having a hell of a time getting it all off of this one for some reason, i've washed, scrubbed and dabbed enough times that the ISO appears to have pulled some red coloring off of the...

Trying to figure out what's wrong with my Snouse build, any help appreciated. I'm getting input throughout the circuit, with an audio probe i can find it at both transistors, legs 1-3 and 7 of the IC, and all pots except for volume. There is still some white residue from the alcohol bath, and I...

All my build problems lately seem to involve low output. I got the Honeysuckle wired up and was a little surprised by how low the volume is, while the toggles do very little and the drive control is pretty subtle as well. I did make two substitutions using what I had on hand at the time, namely...

I got this board all populated and on the testing platform last night, it's pretty wild. Having a weird issue though, where the octave "disappears" quickly when letting notes ring. If I let it ring, even with vibrato trying to keep it sustaining, the octave sort of turns off and I'm left with...

I finally got this thing put together and boxed up. I'm absolutely thrilled with it, definitely going to be my main drive for the foreseeable future. After boxing it up and playing with it, I noticed the blue side output is lower than I expected, with unity around 3:00 and a slight boost with it...

Had some issues with bad GE transistors on the Ungula, eventually ripped off some solder pads trying to swap out parts and grabbed another board with an order during the last sale. It's a little flux-y still, but I'm not seeing any shorts or other issues that would cause output to be slightly...

I ordered a few 308s from Banzai because I needed one for a VFE Alpha Dog, figured I may as well grab multiples. I'm aware the OP07 gives the same sound, I did it for the mojo. I'm looking around and curious if any pedals other than the Rat are known for using this specific chip? I'm not seeing...

Hey, I've got one component missing for this build, there's a 120pf cap between the left gain and volume pot, looking at the top of the board (don't know what the number is, no build docs or schematic up yet). I don't have a 120pf, can anyone familiar with the circuit tell me if there would be...

I'm building a Mas Effects Dark Commotion, schematic here: https://mas-effects.com/files/black-noise-schematic.png It's the third one I've made, since he sent me extras on accident and told me to keep them. No problem whatsoever with the first two, but I have a really strange problem with this...

Sorry if this isn't the right forum, I can move if so. Been staring at this mess for an hour now, and not for the first time. I probably do it once a week. I keep looking at it for a while and getting close, then going "nope, not today." Ignore the missing diodes on the pedalpcb intelligent...

Hey All, I got my Ungula built and it sounds pretty terrible, like sound is struggling to get through and there's a dying battery involved. I audio-probed it, there are some spots I noted to check again later. The tone and shift pots both sound odd, like they're adding and taking away volume at...