1590BB top mount jacks

[mdc]

Hi folks,

Just wondering if someone here could point me toward a PPCB project that you've made featuring a 1590BB enclosure, top mount jacks, and (here's the important thing) clearance in the drill template for plastic enclosed jacks to clear the pots.

I have a 1590BB leftover from before Tayda started carrying the 1590BB2 and I'd like to use it, but I seem to have lost the scrap of paper with the centreline measurement I need scrawled on it. I know it's tight but possible, so if someone can point me towards one that's worked for you I would be super appreciative, thanks!

Bonus points if it's landscape, but I shall make do either way...

 

[Harry Klippton]

I used enclosed jacks on my duocast build. Is this what you mean?

Simulcast AND duocast

Ok, I started working on these two years ago but they're finally done. And WOW I love these! I first heard the Hudson broadcast on probably TPS several years ago and loved it. It's unusual for me to be wowed by a pedal demo and then want it. I had initially built the first revision of the...

forum.pedalpcb.com

 

[VanWhy]

I used enclosed jacks on these 2 1590BB builds:

Octarock Octave

My build for the Octarock Octave board by the one and only PPCB. I've had this boxed for a few weeks now was just waiting for a couple of the IC's to arrive. This thing is super cool. It's fun on its own but it's even more fun stacked with some dirt. Everything fit great and was laid out super...

forum.pedalpcb.com

Arkaim Fuzz

My build of the Arkaim Fuzz. Inspired by the Mountainking Megalith. What a fun build. This thing is SUPER loud. Sounds fantastic. Lots a different fuzz tones to get out of this thing. Highly enjoyable. If you like getting punched in the face with fuzz then this is for you. I used BC338's on...

forum.pedalpcb.com

Used open jacks for my Paragon but should still clear enclosed jacks:

PPCB Paragon

Here is a Paragon that a friend of mine commissioned. He wanted his pup on pedal so I did what I could. All hail king Marty! Pretty much followed the bom. Went with 1S1588 from ebay seller and went with BA282's in place of the MA856s. And yes I did not socket them in. When I finally build mine...

forum.pedalpcb.com

 

[mdc]

Lovely - thank you! You used the drill template in the build docs for those?

 

[Harry Klippton]

I usually use the top jack drill template on 1590bb

125B Top Jack Drill Template - PedalPCB.com

Drill Marking Template

www.pedalpcb.com

 

[ThePanda]

I usually use the top jack drill template on 1590bb

125B Top Jack Drill Template - PedalPCB.com

Drill Marking Template

www.pedalpcb.com

I wanted to add that even if the space of the jacks are apart are not what you want using the 125b template, the vertical height works out great if you move the template around to get it where you really want.

So if you can get the spacing measured out you can always get a correctly placed hole along the y-axis

 

[VanWhy]

Lovely - thank you! You used the drill template in the build docs for those?

Yep, I used the templates in the build docs.

 

[Feral Feline]

I'll throw this out there...


A one-knob boost or fuzz (1590A) with another 1590N1-sized circuit will fit nicely together in a landscape 1590BB.