LDC specs for Duo-Phase

[Saransk93]

There are 12 LDR's in the new Duo-Phase project. But the BOM doesn't state what the specs for them should be. Most "Univibe" clones recommend the Silonex 7532 or 7530 which has a stated 6.7 Meg dark resistance. Also the 9203 which is listed as 5 - 20K light resistance, 20Meg dark. Used in several other "Vibe" designs.
The rest of the design used regular parts so that isn't an issue. I just don't want to buy 12 of the wrong LDR's
Thanks
Michael

 

[DGWVI]

I like the 9203s best, but others have had great results with the KE-10720 from Tayda, which is fairly close to the GL-5528 that can be had for pennies on Amazon

 

[Matopotato]

I stumbled on a selection method. Basically set one of them up, with an LED. Adjust until the LDR reads 1k, then check the others. Keep within 5% deviation until you have 12.
This does not help you in buying I guess. I got mine from Das Musikding in a kit and did not verify them yet.

 

[Erik S]

Post in thread 'Who’s afraid of the DuoPhase?'
https://forum.pedalpcb.com/threads/who’s-afraid-of-the-duophase.11654/post-118689

 

[Matopotato]

I found it again. The LDR selection is in the description of a different but very close build called Lola phase, in the Build notes section:
https://drive.google.com/file/d/1WDIcJKwfED5GuEUQh-Zo87qZaRinuMxV/view?usp=drivesdk

This doc seems to have many other useful instructions as well