Missing Build Docs / Schematics

Is there a schematic for Cannon Fodder MKI? I can't seem to get the "havoc" sound out of the pedal. Both modes sound the same for me.
 
Billyhank said:
Definitely second this request. Mainly for the drill template, I’ve got the board populated.
Click to expand...
How did you populate the Danae board? The PCB image on the website has everything labeled as R1 etc, but I haven't seen a mapping of this back to the parts list.
 
harry_hood said:
How did you populate the Danae board? The PCB image on the website has everything labeled as R1 etc, but I haven't seen a mapping of this back to the parts list.
Click to expand...
The BOM is posted in another thread. And the board itself has the correct components/values on the silkscreen.
 
The values are printed directly on the PCB.

This isn't shown in the preview image because revisions sometimes happen before the board is released.
Board.png
 
Any more build docs for the electrovibe mini? Also having trouble finding short parts - most of the linked parts in the parts list are out of stock...is 8mm diameter too wide for the 100 uF caps?
 
Gsatterw said:
Any more build docs for the electrovibe mini? Also having trouble finding short parts - most of the linked parts in the parts list are out of stock...is 8mm diameter too wide for the 100 uF caps?
Click to expand...
Any electros 50v or less should be ok. You may have to lay them over on their side if you think they might be too tall.
 
pretty much how I find parts that have a max size, go to mouser and use their search selections. always got pana's reg alum electrics being cheaper but nice seeing the organics go smaller
 
Is there a schematic for the Aphrodite? I’m not having problems but it’s one of my faves and I’d like to see why.
 
You must log in or register to reply here.
Back
Top