Missing Build Docs / Schematics

[Gsatterw]

I used this series for the 100uF, 47uF & 10uF. They are a bit pricey but good caps! I just used a random 1uF I had…they are pretty small anyway.

https://www.mouser.com/ProductDetail/Panasonic/16SEPC100M%2bTSS?qs=OE1iw1LrrPEAt2lEmEitdA%3D%3D

Many thanks. Wow, $1 per cap. Panasonic is proud of those.

 

[szukalski]

Is there a schematic for the Aphrodite? I’m not having problems but it’s one of my faves and I’d like to see why.

 

[Robert]

Is there a schematic for the Aphrodite? I’m not having problems but it’s one of my faves and I’d like to see why.

https://docs.pedalpcb.com/schematic/Schematic-Aphrodite.png

 

[Billyhank]

Could I get the drill template for the Danae?

 

[Robert]

Could I get the drill template for the Danae?

https://docs.pedalpcb.com/drill/125B-DrillTempalte_Danae.pdf

 

[Billyhank]

https://docs.pedalpcb.com/drill/125B-DrillTempalte_Danae.pdf

Thank you!!

 

[Micklebot]

Not exactly a missing build doc, but I wasn't sure where else to post this; the drill template in the build doc for the Wrectifier has a LED whole where the switch hole should be, and no hole for the LED, here's hoping I can manage to drill a whole for the LED without messing up the waterslide I've already laid down and clear coated on. Wish me luck...

 

[PangeaDestructor]

Got a schematic for the pot and kettle yet?

Or a close-up of the board's underside that shows the traces?

 

[blackhatboojum]

Any chance we could get a schematic for the Byzantium flanger?

 

[Robert]

Any chance we could get a schematic for the Byzantium flanger?

Sure, it needs to be straightened up a bit but this is dumped straight from the project file.

https://docs.pedalpcb.com/schematic/Schematic-Byzantium-WIP.png

 

[blackhatboojum]

Sure, it needs to be straightened up a bit but this is dumped straight from the project file.

https://docs.pedalpcb.com/schematic/Schematic-Byzantium-WIP.png

Sweet! Much appreciated .

 

[highway31]

Any chance for the Whipped Cream Build documentation?
Thanks,
KJ

 

[mik]

Are the build docs for the Double Pendulum on their way?

The things I'm interested in are:

• Circuit diagram + BOM
• Guidance on setting up the LEDs + LDRs (are the LEDs also doubling as a rate indicator?)
• Drill template

It looks like a really fun design, can't wait to finish the build!

 

[Cvoxdog]

Double Entendre new revision drill template available?

 

[Robert]

Double Entendre new revision drill template available?

https://docs.pedalpcb.com/project/drill/125B-2_Knob%20+%20Switch.pdf

 

[Harry Klippton]

Do you have the ample alpaca schematic ready?

 

[Robert]

Do you have the ample alpaca schematic ready?

https://docs.pedalpcb.com/schematic/Schematic-AmpleAlpaca.png

 

[Harry Klippton]

https://docs.pedalpcb.com/schematic/Schematic-AmpleAlpaca.png

Thanks!

 

[Idlebeach]

Can I get the Champ Stamp schematic if it's handy? I need to make a post about the trim pot / if I need to adjust the j201..

 

[spi]

Actually, I'm also pretty keen to get a look at the Little Biastard schematic, since I'm on a Fuzz building kick at the moment

I'm curious about this pedal too. Is it based on something?