Missing Build Docs / Schematics

[ColorMeBaddFann]

Hi there. Apologies if I missed a post in there somewhere, but does anyone have the BOM for the Pro-10? Thanks!

 

[Nostradoomus]

search is your friend!

Post in thread 'Missing Build Docs / Schematics'

Apr 5, 2022

Pro-10 BOM and drill template, working on the full doc and the others today.

• Robert

• 

 

[falco_femoralis]

I'm looking for the schematic for the Dielectric Boost. I'd like to adapt a smaller board like a Je Taime etc to use this circuit in a smaller enclosure like a 1590B. Thank you

 

[webberfx]

any chance you could post the build docs for the Basstortr? pretty please

 

[Robert]

any chance you could post the build docs for the Basstortr? pretty please

We're snowed in today (this feels really unusual to say) so there's a good chance.

 

[Mentaltossflycoon]

"It's got a snowballs chance in Georgia."
(Looks out window)
"Shit."

 

[Robert]

any chance you could post the build docs for the Basstortr? pretty please

https://docs.pedalpcb.com/project/Basstortr-PedalPCB.pdf

 

[iamjackslackof]

@Robert Would you be able to post the drill guide for the Microbuffer? I have a 1590A for it, and I almost got up the nerve to drill it by eyeballing it, but I chickened out

 

[ColorMeBaddFann]

search is your friend!

Post in thread 'Missing Build Docs / Schematics'

Apr 5, 2022

Pro-10 BOM and drill template, working on the full doc and the others today.

• Robert

• 

Thanks! Was looking through this thread for ages. Dunno how I missed this

 

[Nostradoomus]

Thanks! Was looking through this thread for ages. Dunno how I missed this

if you hit the search bar with "_____" PCB name and "BOM" it should come up if it's been posted. Try without hyphens etc if it doesn't work.

 

[Feral Feline]

I'm looking for the schematic for the Dielectric Boost. I'd like to adapt a smaller board like a Je Taime etc to use this circuit in a smaller enclosure like a 1590B. Thank you

Je T'aime is your best and closest match.





Couple other choices:
The Amentum Boost as second choice, third choice would be the Aft Preamp.
Both are EQD one-transistor builds.
The Amentum would be easiest of the two alternativees to Je T'Aime, swapping out the emitter resistor for a switch loaded with the Lovepuddle emitter-Tchullery.
The Aft would be the choice if you want to add some features, such as the Aft's input cap switch.

Really though, easy enough, Je T'aime has all the necessary bits already in play...

Change Je T'aime's R5 to 680Ω and reroute from emitter to GND.
Sneak in a switch at C3 (mounting C3 to the switch) and follow the values in the schematic below or from the Dielectric PCB...

 

[iamjackslackof]

@Robert Would you be able to post the drill guide for the Microbuffer? I have a 1590A for it, and I almost got up the nerve to drill it by eyeballing it, but I chickened out

@Robert Come on Bobby, there's an innocent 1590A who never hurt nobody that's fixin' to get tore up something fierce if it doesn't get a drill template for the Microbuffer!

 

[Robert]

@Robert Come on Bobby, there's an innocent 1590A who never hurt nobody that's fixin' to get tore up something fierce if it doesn't get a drill template for the Microbuffer!

Stop! Put down the drill! We can work this out!

 

[iamjackslackof]

Stop! Put down the drill! We can work this out!

Alright mister, but no funny business! Any sudden moves and the enclosure gets it! No coppers either, see?

 

[Nostradoomus]

dangit Bobby

 

[KR3]

@Robert can you post the schematics for the 3-Channel Mixer and the 3-Channel Splitter please?
I want to see what extra functionality I can wring out of them.

 

[Same]

@Robert is the Acrobat Parametric Distortion Build Doc/Schematic coming soon?

 

[Grazza]

Hi guys,

I'm hunting for the following build documents:

Souldrive - if the silk screen is accurate I could maybe order components off that, I'm assuming it's a 125b enclosure, can probably use a similar drill template.

Double pendulum - more info the better here.

ADHD - I ordered a PCB and the new improved bypass module. Is it safe to use the old documents for parts order? Haven't seen the PCBs yet so I haven't worked out how the bypass module works yet. Is it also still a 125b, I can probably use another drill template that's similar and modify it if need be.

Thanks.

 

[jd6string]

Minidrive pcb has been on waitlist for quite a while. Was wondering if it will be available or has it been discontinued?