Harry Klippton Well-known member May 24, 2022 #1 No power, LEDs won't light up, doesn't pass signal, bypass doesn't work, and broken traces. I think there might be a short between head and ass
No power, LEDs won't light up, doesn't pass signal, bypass doesn't work, and broken traces. I think there might be a short between head and ass
V vigilante398 Authorized Vendor May 24, 2022 #2 What voltages are you getting? I suspect the output buffer. Upvote 0 Downvote
Big Monk Well-known member May 24, 2022 #3 I think you need to trim this so it doesn't short: Upvote 0 Downvote
fig Village Idiot May 24, 2022 #4 A short between head & ass? I can’t seem to make heads or tails of it Will. Upvote 0 Downvote
B benny_profane Well-known member May 24, 2022 #5 Is this why you don’t like the Rat? Upvote 0 Downvote
BuddytheReow Breadboard Baker May 24, 2022 #6 You may need a new solder sucker to swap those components out! I do see a couple cold joints Upvote 0 Downvote
Mcknib Well-known member May 24, 2022 #7 A man of your ability and you've used non conductive fencing wire? Always check for continuity or you ain't going to Boomtown Upvote 0 Downvote
A man of your ability and you've used non conductive fencing wire? Always check for continuity or you ain't going to Boomtown
E EGRENIER Well-known member May 24, 2022 #10 Clean it up with ISO first, let us know how that goes Upvote 0 Downvote
Mentaltossflycoon Well-known member May 24, 2022 #11 Harry Klippton said: No power, LEDs won't light up, doesn't pass signal, bypass doesn't work, and broken traces. I think there might be a short between head and ass View attachment 26668 Click to expand... But hey, no white washer! Upvote 0 Downvote
Harry Klippton said: No power, LEDs won't light up, doesn't pass signal, bypass doesn't work, and broken traces. I think there might be a short between head and ass View attachment 26668 Click to expand... But hey, no white washer!
daeg Well-known member May 24, 2022 #12 Looks like it might have been fried by overvoltage. I wouldn't bother trying to troubleshoot. Put it in the 'save-for-later' bin and try to make another one. Upvote 0 Downvote
Looks like it might have been fried by overvoltage. I wouldn't bother trying to troubleshoot. Put it in the 'save-for-later' bin and try to make another one.
Betty Wont Well-known member May 24, 2022 #13 Gonna have to de-goop that and see what's going on inside. Upvote 0 Downvote
fig Village Idiot May 24, 2022 #14 daeg said: I wouldn't bother trying to troubleshoot. Put it in the 'save-for-later' bin and try to make another one. Click to expand... Uh oh, that triggered a tune… Upvote 0 Downvote
daeg said: I wouldn't bother trying to troubleshoot. Put it in the 'save-for-later' bin and try to make another one. Click to expand... Uh oh, that triggered a tune…
Betty Wont Well-known member May 24, 2022 #15 Take a look at my last three rat builds. They are all working good. Maybe you can see where you went wrong. Upvote 0 Downvote
Take a look at my last three rat builds. They are all working good. Maybe you can see where you went wrong.
E EGRENIER Well-known member May 24, 2022 #16 Betty Wont said: View attachment 26683 Take a look at my last three rat builds. They are all working good. Maybe you can see where you went wrong. Click to expand... I like the one in the middle with the dual Red LED ! Upvote 0 Downvote
Betty Wont said: View attachment 26683 Take a look at my last three rat builds. They are all working good. Maybe you can see where you went wrong. Click to expand... I like the one in the middle with the dual Red LED !
Barry Well-known member May 24, 2022 #17 I think if you manage to salvage it, it's going to sound brittle! Upvote 0 Downvote
Feral Feline Well-known member May 25, 2022 #18 ¡¡ ¡¡ ¡¡ NNNNNNNNNOOOOOOOOO !! !! !! ¡ EES NO RAT, WAS MUY FILIGREE SIBERIAN HAMSTER ! ¡¿¡ WOT HEV YOO DON TO EET !?! Upvote 0 Downvote
¡¡ ¡¡ ¡¡ NNNNNNNNNOOOOOOOOO !! !! !! ¡ EES NO RAT, WAS MUY FILIGREE SIBERIAN HAMSTER ! ¡¿¡ WOT HEV YOO DON TO EET !?!
C Cvoxdog Well-known member May 29, 2022 #19 Any updates on this? I don't think this is a clone. It looks like a real rat. Maybe send an email to Proco to see if they'll still fix it under warranty. Weirdly, I don't think JHS covered this version in their history of the rat video. Upvote 0 Downvote
Any updates on this? I don't think this is a clone. It looks like a real rat. Maybe send an email to Proco to see if they'll still fix it under warranty. Weirdly, I don't think JHS covered this version in their history of the rat video.
Chuck D. Bones Circuit Wizard May 30, 2022 #20 More visual inspection required. Can we get a look at the back side? Upvote 0 Downvote