Nostradoomus
Well-known member
It’s a 1590XX. The laser job took 4 hours, I can’t mess this up haha.
What should I put in this box?
- Thread starter Nostradoomus
- Start date
It’s a 1590XX. The laser job took 4 hours, I can’t mess this up haha.
bhcarpenter
Well-known member
Are you going to be able to drill holes in that?!? It looks too great to cover any part of it up.
Last edited:
Nostradoomus
Well-known member
Yes I am able to drill it. The middle point is for an LED. I’m thinking maybe 2 one knob circuits just to keep it minimalist.
SYLV9ST9R
Well-known member
That's a good idea as it looks amazing. You could always do a cool combo of other boards, but with just one pot on the outside and the the rest as internal trimmer. You can dial it as you like, but then have control over just one aspect of the sound, keeping in the minimalist/one-knober spirit, but still have the option to change the sound a bit later.
Switches and pots in the 4 corners get my vote.
K Pedals
Well-known member
Bricksnbeatles
Member known well
Put 6 separate phase 90 circuits in it, and have them all have the rate slaved to the same lfo so you can all control them with the one rate knob. Then have 6 separate inputs and outputs, and wire it all up for true bypass with a 12 pole toggle switch (they do in fact make them!). Now you’re able to apply luscious phasing to the complete stereo image of all of your favorite 5.1 mix SACDs and DVD-As, and all of your favorite surround sound Blu Rays and 4K discs. You thought the score to Interstellar and Dunkirk was an experience? Wait until you get to experience it in 5.1 with PHASERS!!!!
bifurcation
Well-known member
Cookies?
Nostradoomus
Well-known member
Yes.
BurntFingers
Well-known member
One knob fuzz with the biggest knob you can find.
Nostradoomus
Well-known member
I’ve got a Gorva grande somewhere. Maybe side mount a small pot with an HM-2 style EQ blender.
BurntFingers
Well-known member
Too small.
Something like this but it's only 38mm
Solid Potentiometer Knob Whole Aluminum Amplifier Tube Volume D38 H28
Solid Potentiometer Knob Whole Aluminum HIFI Amplifier Tube Volume Outer Diameter 38mm High 28mm Inner Diameter 6mm Silver White DIY
www.iwistao.com
No eq. No blend. Nothing but single knob fuzz action.
Nostradoomus
Well-known member
Haha jeebus! I’d rather put one of the smallest knobs I can find on it.
Bricksnbeatles
Member known well
I just ordered a 44mm knob for the tone knob of a big muff I’m making. I wanted to order one that was even bigger, but nothing I found that was bigger than that matched any smaller sized knobs for the rest of the controlsToo small.
Something like this but it's only 38mm
Solid Potentiometer Knob Whole Aluminum Amplifier Tube Volume D38 H28
Solid Potentiometer Knob Whole Aluminum HIFI Amplifier Tube Volume Outer Diameter 38mm High 28mm Inner Diameter 6mm Silver White DIY
No eq. No blend. Nothing but single knob fuzz action.
JamieJ
Well-known member
This would look amazing with two circuits with trimmers for pots so its a set and forget circuit. You would only need to drill for two foot switches. That would keep it super minimalist. What about a one knob fuzz followed by a boost type circuit?
Feral Feline
Well-known member
One-knob Bazz Fuss with tiniest knob (external trimmer).
Feral Feline
Well-known member
Bricksnbeatles is a madman.
I like that.
Whatever you build, small knobs all along the top would still look good.
As Jubal81 suggested, a reverb of some sort with delay added — like an Afterneath on steroids.
Maybe checkout DeadAstronaut's delays and 'verbs.
Another suggestion, mount the pots in between the jacks, reverse wire them so they turn "up" to the right.
I like that.
Whatever you build, small knobs all along the top would still look good.
As Jubal81 suggested, a reverb of some sort with delay added — like an Afterneath on steroids.
Maybe checkout DeadAstronaut's delays and 'verbs.
Another suggestion, mount the pots in between the jacks, reverse wire them so they turn "up" to the right.
