What's on the workbench?

[music6000]

It sure as hell won't have side mounted jacks lol

After all the jacks are fitted, there wont be any room left for anything else lol!

 

[Robert]

With only 4 Knobbies, will it fit in a 1590b!?????

At this point I'm not ruling out two 1590DD's connected together with 32-pin ribbon cables.

 

[BurntFingers]

Back in the day I used to handpaint everything.

This is some sort of UFO abduction happening in the wilderness but mostly looks like a kettlebell blasting off. Both interpretations are cool.




It's a circuit I've been working on, one of my own, involving 4 opamp stages doing some stuff. The boost switch is the last opamp stage and selects a gain range range of 1.2-12x on the pot, so with the main gain low and the boost on full you get some nice round fat chunk. But with the gain up high and boost on zero you get a healthy boost in the upper mids. It turned out rather well.


A 3 way toggle for some clipping action.



This is why I need a dual footswitch 125b.

 

[Robert]

what happened with the alpha omicron? not gonna see the light?

Eventually, yes.

 

[JamieJ]

@PedalPCB - lots of people have mentioned on the forum how many builds they have going on at once. I would love to know how many traces you have had on your to do list when you have been busiest?

 

[Robert]

My "to do" list is never ending.

There are:

• Pedals that I'm searching for
• Pedals that are here but waiting to be traced
• Pedals that are currently in the process of being traced
• Pedals that are traced, waiting for a layout
• Layouts that are complete but waiting to be verified
• Layouts that need to be revisited for some reason

This is my desk (they're usually sitting on a table to the side, not scattered all over the place like this)


This is the end of my workbench


This is the shelf where things sit in some form of limbo

 

[Robert]

This was not an easy one to track down....

 

[fig]

You are doing an awesome job!

 

[Robert]

You are doing an awesome job!

Which reverb?

 

[fig]

Which reverb?

Doh! I read it back and it sounded disrespectful, and that is the opposite of how I feel.

 

[Robert]

I didn't take it that way at all.

 

[music6000]

This was not an easy one to track down....

View attachment 13220

Brett Kingman came up with THIRTY SOMETHING rename after VOX didn't appreciate the first batch being ACE THIRTY!


This was the one I was after!

 

[Robert]

 

[finebyfine]

Brett Kingman came up with THIRTY SOMETHING rename after VOX didn't appreciate the first batch being ACE THIRTY!

View attachment 13228
This was the one I was after!

He should have called it the 8:30

 

[PapaBear]

This was not an easy one to track down....

View attachment 13220

Sweet, I really like a lot of the Wampler stuff

 

[Robert]

I think this is my favorite Wampler pedal so far.

Gain and Boost cranked up is probably the best Brian May in a pedal I've heard.

 

[jubal81]

I think this is my favorite Wampler pedal so far.

Gain and Boost cranked up is probably the best Brian May in a pedal I've heard.

I've been wondering, since you've been through literally hundreds, if you have any 'sleeper' recommendations - really good circuits that maybe aren't as popular.

 

[fig]

I just opened the mail. I gotta say, these 2 vibe boards are exceptional and the faceplate for the ElectroVibe is spot on! Got my cheat-sheet sticker too!

Also got a half dozen C500 dual pots from elsewhere...if only I could remember why?

 

[jjjimi84]

So pumped for the ace thirty!

Sleepers for me are the celestial drive, jet drive and the skylight. I play them quite a bit.

I would love to know what the worst sellers/sleepers are conversely I think it would be very interesting to see what the best sellers are and why is it a klone.

 

[SillyOctpuss]

Also got a half dozen C500 dual pots from elsewhere...if only I could remember why?

After taking a break from building for almost 3 years I keep finding things in my stash that I have no memory ordering and no idea what they were ordered for.