Cordyceps Ring Modulator Build Doc?

[dcfvgb]

Cordyceps Ring Modulator Build Doc available? Very Interested in this circuit!

 

[Flashheart]

Is anyone using an existing drill template for the Cordycepts Ring Modulator? I'd try to measure it out, but I can't measure worth a @#$%.

 

[Nostradoomus]

This but flipped horizontally should work or get you darn close

https://docs.pedalpcb.com/project/drill/125B-3_Knob-Switch-7.pdf

 

[unfun23]

has any progress been made on this build doc? I have a Cordyceps pcb on the way.

 

[Nostradoomus]

what do you need

 

[unfun23]

i was hoping for just a standard pedal pcb build doc, but i did find the parts list and took note of the drill template above. Maybe that's all I need. I'm new-ish to building pedals (about 15 under my belt) and i just have a very particular workflow that works for me at the moment. If there isn't a standard document, i'll survive.

 

[lcamino64]

Build docs would be useful

 

[unfun23]

I’m confused by the parts list vs the screenprinting on the pcb. The ICs don’t match in total quantity or part.

 

[Robert]

Something bad wrong with that BOM, not sure what happened there.

I'll get it reposted today, possibly with the complete doc if I can get the time.

 

[LaceSensor]

Looking for this build doc and schematic, is it available?

 

[jwin615]

Looking for this build doc and schematic, is it available?

Are we talking about the oscillator bleeding into other pedals (like when the Nutty Fuzz is bypassed) or more like a gate that kills the oscillator when you aren't playing? (I suppose one solution would solve both problems)

Take a look at the Cordyceps schematic, it uses a simple opto based gate to mute the carrier signal when you stop playing.

EDIT: Well, you know, it would help if someone would post the damned schematic. Give me a just a bit.

View attachment 102585

 

[dcfvgb]

Looking for this build doc and schematic, is it available?

+1