Are These Good?

@bean Much love here for your boards dude. I've got a "pair" of of Skoolies in the pipeline that I need to build soon.....😨...for my amp setup.
I'm running the Total Recall and Tourbus now in my recording rig. Everyone here's sick of hearing how much I love these pedals.....:ROFLMAO:
 
@bean

BRING BACK THE 1590G series! Especially relevant now that we have 1590G2 enclosures and SMD Caps that are actually through-hole.

OR

Just bring back the 1590G WIGL, 'cause I have about a dozen finished enclosures for it that need to be built.


The "Prototype":

cowgirl1-jpeg.4199831

cowgirl0-jpeg.4199832





1590G Wigl boards, Please and thank you.
 
Feral Feline said:
@bean

BRING BACK THE 1590G series! Especially relevant now that we have 1590G2 enclosures and SMD Caps that are actually through-hole.
Click to expand...

Funny enough, I requested directly to Hammond that they make a taller G a few years ago. They actually responded positively but I kinda forgot about it when I stopped doing that series.
 
Laundryroom David said:
Good timing. I just built a Laureate and was gonna hate but I actually loved having both the layout with r, c etc and the same layout with values. I printed both and the build was smoooooth.
Click to expand...
Did you use the faceplate? I didn't see a build report or demo...... :ROFLMAO: . I've been eyeing the Laureate for a while. Actually mulling over which Nobles to build. Kinda thinking about the Nordland ODR-C.
 
MichaelW said:
Did you use the faceplate? I didn't see a build report or demo...... :ROFLMAO: . I've been eyeing the Laureate for a while. Actually mulling over which Nobles to build. Kinda thinking about the Nordland ODR-C.
Click to expand...
Sure did! Just posted my build report. I want to build the ODR-C as well. I feel a deep dive coming on lol
 
MichaelW said:
Did you use the faceplate? I didn't see a build report or demo...... :ROFLMAO: . I've been eyeing the Laureate for a while. Actually mulling over which Nobles to build. Kinda thinking about the Nordland ODR-C.
Click to expand...
Also, and I’m a little ashamed to admit this, I have no means of making a demo that I’d feel good about sharing. Focusrite, Roland, Two Notes … I freeze up with indecision. Need to open a separate thread so I don’t hijack this one any further
 
joelorigo said:
I got a recommendation on this board a while back to get a certain 3DPT footswitch that Small Bear sells and since then I haven't had one issue with a bad switch. They are currently out of stock on the PCB pin version, so are these good?

stompboxparts.com

3PDT Footswitch PRO - PCB Pin

Top Quality Parts for Guitar Effects Pedals and DIY Music Devices. Knobs, Pots, Switches, Kits, LEDs, Enclosures, Jacks, Wire, Resistors, Capacitors, Semiconductors
stompboxparts.com stompboxparts.com

And what's the pros & cons on the 1kg vs 3kg Click?
Click to expand...
How many bad switches did you have before you switched switches?

I’ve been rolling the dice on the cheap tayda ones and haven’t had a lemon yet.
 
Erik S said:
How many bad switches did you have before you switched switches?
Click to expand...
I got the recommendation after a few problems in my early building that came down to the switch. Maybe I got a few random bad ones or maybe I used too much heat because I was new. But those blue ones from Small Bear have been great. I have recently used others from Tayda and Stompbox Parts and so far so good.
 
You must log in or register to reply here.

Similar threads

C
ON/OFF/ON switch sanity check - are these two schematics equivalent?
Replies
2
Views
601
Feral Feline
Feral Feline
Barnshart
Are these LM308's legit?
Replies
11
Views
1K
Barnshart
Barnshart
K
3pdt different types of wiring
Replies
10
Views
1K
benny_profane
B
rwl
6-Band Eq (slider edition): "6-Band Eaglizer"
Replies
1
Views
185
Synchrony Pedalworks
Synchrony Pedalworks
Silver Blues
Aion FX Binary
Replies
3
Views
716
Feral Feline
Feral Feline
Back
Top