Not exactly a missing build doc, but I wasn't sure where else to post this; the drill template in the build doc for the Wrectifier has a LED whole where the switch hole should be, and no hole for the LED, here's hoping I can manage to drill a whole for the LED without messing up the waterslide I've already laid down and clear coated on. Wish me luck...
Missing Build Docs / Schematics
- Thread starter Robert
- Start date
PangeaDestructor
Active member
Got a schematic for the pot and kettle yet?
Or a close-up of the board's underside that shows the traces?
Or a close-up of the board's underside that shows the traces?
Last edited:
blackhatboojum
Well-known member
Any chance we could get a schematic for the Byzantium flanger?
Robert
Reverse Engineer
Sure, it needs to be straightened up a bit but this is dumped straight from the project file.
blackhatboojum
Well-known member
Sweet! Much appreciated
.Are the build docs for the Double Pendulum on their way?
The things I'm interested in are:
The things I'm interested in are:
- Circuit diagram + BOM
- Guidance on setting up the LEDs + LDRs (are the LEDs also doubling as a rate indicator?)
- Drill template
Harry Klippton
Well-known member
Do you have the ample alpaca schematic ready?
Harry Klippton
Well-known member
Thanks!
spi
Well-known member
I'm curious about this pedal too. Is it based on something?
The trimpot on that one biases the silicon transistor from what I remember.
benny_profane
Well-known member
Not seeing any docs for the Permanent Breadboard?
Locrian99
Well-known member
Might be asking early here but I'd love to see a schematic for the Mono>Stereo headphone amp, also am dying to know what the power amp projects are going to be I see a 12ax7 breakout board.... Just finished a ruby tuby on vero, would love to see some tube projects. Lastly this probably isn't the right place to ask any chance of a Tumnus Dlx clone in the near future.. Thanks!
Last edited:
chongmagic
Well-known member
Sproing Deluxe with drill template?