New JHS Pedals DIY Kit – Monday May 5th

You'll have to omit one pole of the 4PDT switch (or use a 4PDT footswitch), it's used to mute the inactive channel but shouldn't be necessary with such a low gain pedal.

The slide switch has to be completely disconnected otherwise the footswitch won't work. I'd be tempted to remove the switch, clip the leads (except for the four corner supports), then reinstall it to fill the hole. Like @ICTRock said, you could tap onto the leads of the switch to use it for another function.

NOTADUMBLE-3PDT.png 3PDT.png
 
Last edited:
Zvirbulis said:
The OD part is an exact copy of Hermida/Lovepedal Zendrive aka Mahayana Drive cirquit.
Click to expand...

Have you measured the caps or are you referring to the schematic in the video above?

The schematic in the video is of a Zendrive, not an actual trace of the NOTADUMBLE. Take a look at the clipping arrangement, for example.

The NOTADUMBLE has two MOSFETs and three silicon diodes, no 1N34 to be found.
The output capacitor is significantly larger as well (4.7uF vs 470nF).

The boost is a JFET boost, not a Rangemaster as suggested in the video.

EDIT: The boost is actually closer to this Dumble style JFET boost, one of his other videos.

I'm guilty of just clicking through, not watching the entire thing, so if I misunderstood I apologize. :ROFLMAO:
 
Bricksnbeatles said:
Explanation for the clean channel not resembling the A Box Later

Click to expand...
Honestly I still really dig the clean channel. The drive channel isn’t my thing, but I’m going to keep the clean channel on my board even if I have to make my own pcb for it (gotta get it into a 1590b with top jacks 😏). With the input set low it thins things out in a really nice way if it’s boosting another overdrive circuit or going into an overdriven amp. I can get a little clearer pick attack into my overdrives with it but it still has a lot of volume on tap.

I feel like I just TGP’d that so my apologies lol but I dig it even if it’s the Dumble fumble bastard circuit.
 
Robert said:
Turns out the NOTADUMBLE isn't actually the exact same circuit as a Dumble unit and some folks are surprised/disappointed/upset.
Click to expand...
Rather I think it is a Dumble, but it's NOTTHEDUBMLETHEYSAID, but a different Dumble. So it's not the bigger, more complicated Box It Later, but the smaller BBC-1 pedal.

Edit: A small off hand mention of how the drive side is based on a "90's dirt pedal that did Dumble things".

Edit2: lol the shootout section is just two short strums of both pedals, one with controls around noon and one with output dimed, hardly a "shootout", although I believe they probably sound pretty similar
 
Last edited:
Fama said:
Rather I think it is a Dumble, but it's NOTTHEDUBMLETHEYSAID, but a different Dumble. So it's not the bigger, more complicated Box It Later, but the smaller BBC-1 pedal.

Edit: A small off hand mention of how the drive side is based on a "90's dirt pedal that did Dumble things".

Edit2: lol the shootout section is just two short strums of both pedals, one with controls around noon and one with output dimed, hardly a "shootout", although I believe they probably sound pretty similar
Click to expand...
Even then I thought they didn't really sound the same when he dimed the gain.
 
You must log in or register to reply here.

Similar threads

T
  • Question Question
Stompbox Fuzzface DIY Kit
Replies
8
Views
949
spi
spi
VanWhy
DEMO Other* Pedals DIY Stock Albini Blues Kit Build
Replies
3
Views
459
JasonWickersham
J
Rpschultz13
Q-Tune DIY Tuner kit
3 4 5
Replies
96
Views
16K
vigilante398
V
OD is Glorious
PedalPCB Enchanted Boost 1590a edition/JHS Pedals Prestige Buffer / Booster
Replies
0
Views
297
OD is Glorious
OD is Glorious
jaminjimlp
JHS JAPAN FUZZ
Replies
9
Views
4K
jaminjimlp
jaminjimlp
Back
Top