Plecostomus Fuzz C101 and C1 swapped?

[Ctrl4Smilerz]

Hi everybody, I finally have all my parts, and stared worked on my first build, Plecostomus Fuzz but hit a snag. In the documents C101 is listed as 47n but on the board its shown as 470p and C 1 is listed in the documents as 470p but on the board its shown as 47n. I double checked online and I don't think these are equvalent values, but I am new to electronics so it's possible I'm wrong. Which one is correct?

 

[olivero1]

Edited to correct the information. The Silkscreen is correct on the PCB!

 

[Robert]

Follow the markings on your PCB.

The location of the caps were swapped around, the build doc needs to be updated.

 

[olivero1]

Follow the markings on your PCB.

The location of the caps were swapped around, the build doc needs to be updated.

View attachment 16385

Good to know! Thanks for correcting me!

 

[Ctrl4Smilerz]

Follow the markings on your PCB.

The location of the caps were swapped around, the build doc needs to be updated.

View attachment 16385

Got it. Thanks!