Problems with wiring pathogen PCB

[mzorrer]

Hello, I need help in phatos PCB project not working, no sound, just bypass working, there are something wrong with wiring ?

I already check all components assembly. Check pictures. Thanks !

 

[Robert]

Does the LED light?

It's probably not an issue unless you're using TRS (stereo) cables, but you have the ground wires connected to the Ring lug of the jacks instead of the Sleeve. (The angled lug is the Sleeve/Ground connection)

PedalPCB Wiki - 1/4" Jack Pinout

 

[mzorrer]

Yes, LED light ! I'm using single cables, ok i will check jacks connections !

 

[zgrav]

can you take the board out of the enclosure and share a clear picture of the solder side?

 

[mzorrer]

ok, I will check this and take more pictures on thursday, problem is not in wiring jacks, bypass working fine.

 

[zgrav]

Not saying this might be the case, but bypass works when the jacks are wired backwards or when the input and output cables are accidentally reversed. The LED would work in either of those cases too.

 

[jimilee]

ok, I will check this and take more pictures on thursday, problem is not in wiring jacks, bypass working fine.

Just looking at the soldering in the top, it looks like you could go back and reflow those joints so the solder flows through the eyes. We’ll know more after you post the pics.

 

[mzorrer]

Hi! Ohh \o/ now working fine, Just a cold solder on pot. This pedal's a killer machine! Perfect

 

[mzorrer]

Where I cold post audio samples ?

 

[Username123]

Where I cold post audio samples ?

Go to the build report section and post a build report there!