What's in the mailbox? 📬 📦

[Mentaltossflycoon]

It feels stupid to say it but they look coooool.

 

[steviejr92]

sooooooo coooooool

 

[Nostradoomus]

20x125B enclosures for the princely sum of 200 Canadian funny monies. God I hope they aren’t flimsy

 

[PapaBear]

Nothing interesting incoming, but I did put a package together for a friend

 

[andare]

Stompbox and PedalPCB in the mail today. Tayda due tomorrow.
High fives and gratitude toward Mr. @PedalPCB for the surprise addition!! I was stoked at the thought of the Sproing and Flock but that HV board is the Bee’s Knees! Thank you, just last night I starting a Perf board Hv supply. This will be so much cooler!
Ps: power is out so flashlight for photo and no soldering tonight. But good times are on their way.
View attachment 31457

I don't know what those square boards are, I guess I m not part of the inner circle. I saw those breadboards in the shop however and I can't imagine how I would use them. What are you gonna do with them?

 

[Dan0h]

I don't know what those square boards are, I guess I m not part of the inner circle. I saw those breadboards in the shop however and I can't imagine how I would use them. What are you gonna do with them?

The breadboards are just for experimenting. I have a couple Perf builds but these look really nice and are set up like a regular breadboard how the tracks run. The squares are a High Voltage supply for powering tubes, a rabbit hole in itself to explore.

 

[szukalski]

If anyone has suggestions on stellar projects that utilize D9k or D18 I'm down.

You can try a Green Ringer. I always have a lot of fun trying different diodes in those. Each give their own flavour.

 

[fig]

20x125B enclosures for the princely sum of 200 Canadian funny monies. God I hope they aren’t flimsy

I hear Canadians can be quite sturdy

 

[Feral Feline]

Canadian Hammonds are indeed sturdy.

 

[ICTRock]

View attachment 31327
Because who doesn’t need a fifth delay pedal? Always been curious ab the Catalinbread echorec, figured this was a close approximation. Also interested in a side by side with my Sagan delay.

I liked it much better than the sagan

 

[Passinwind]

Time to get rewired:


22AWG, silicone insulation (essentially burn proof and super easy to strip), 60 strands. Standard fare for my onboard preamps for several years now. Their ribbon cable is pretty useful too.

 

[vigilante398]

MY NEW AMP IS GOING TO BE HERE THURSDAY.

Needless to say I will not be coming to work on Thursday. Or Friday.

 

[finebyfine]

Time to get rewired:

View attachment 31477
22AWG, silicone insulation (essentially burn proof and super easy to strip), 60 strands. Standard fare for my onboard preamps for several years now. Their ribbon cable is pretty useful too.

I looooove this wire. Been meaning to reup on their ribbon wire for a while now too, and this is the perfect reminder

 

[almondcity]

I have some 250K J-taper pots coming in the mail for my telecaster, anyone like these tapers for volume and tone? debating between these and 300K audio tapers (10%) and I can't decide

 

[jimilee]

I have some 250K J-taper pots coming in the mail for my telecaster, anyone like these tapers for volume and tone? debating between these and 300K audio tapers (10%) and I can't decide

J Taper?

 

[swyse]

J Taper?

less aggressive log taper, between log and linear more or less.

 

[almondcity]

J Taper?

I had to look it up recently myself but as stated above it's a taper between audio and linear. You have about 30% resistance at half way as opposed to 10/20% resistance with an audio taper pot

 

[Harry Klippton]

Just some monoprice cables and onna those spark plug wire tachometers

 

[Bricksnbeatles]

I have some 250K J-taper pots coming in the mail for my telecaster, anyone like these tapers for volume and tone? debating between these and 300K audio tapers (10%) and I can't decide

A few posts back I mentioned how I got some j taper pots from amplified parts. I’m a big fan of J-taper pots— have a fair number of builds that have them installed.

 

[Passinwind]

Incoming today: a couple of sets of breakout boards for Alpha and Omeg PC mount pots. Saves a lot of wear and tear on the pots themselves.

And then a test run of speaker logo badges from Amplifyfun: