Missing Build Docs / Schematics

[Mbens11]

Is the schematic available for the skeptical buffer yet

 

[ntuncer]

@Robert could you please share the drilling templates please?

• Precipice Overdrive
• Scenario Preamp
• Poison Apple Auto-Wah

Thanks

 

[manfesto]

@Robert could you please share the drilling templates please?

• Precipice Overdrive
• Scenario Preamp
• Poison Apple Auto-Wah

Thanks

Precipice looks like the standard 3-knob type 1, Poison Apple looks like the standard 4-knob type 1

The Scenario you can use the same drill template as the Powder Blue (4-knob layout but you drill the center LED hole bigger for the center switch)

https://docs.pedalpcb.com/project/PowderBlue-PedalPCB.pdf

 

[Fama]

@Robert could you please share the drilling templates please?

• Precipice Overdrive
• Scenario Preamp
• Poison Apple Auto-Wah

Thanks

If you use Tayda for drilling I've got a template for the Scenario Preamp, but the LED is wired offboard (to leave more room for graphics) and I haven't built it yet (probably will during the weekend though, if you can wait for verification). I think I indeed used the Powder Blue as a starting point.

Edit: I also agree with manfesto that the other two look like the standard 3 and 4 knob layouts.

 

[KR3]

Is there a schematic for the Equilux Mini, please?

 

[Drayve85]

Are we any closer to getting the updated pot and kettle schematic???!!! Please Robert?!?!

 

[twebb6778]

Will schematics for Loft Fuzzes be coming soon?

 

[rolf]

Hi there!
Any drilling template for Virgil?

 

[manfesto]

Hi there!
Any drilling template for Virgil?

Looks like any 4-knob Type 1 drill template will work

 

[nate433]

Is the full size Equinox drill template available anywhere? I've searched the threads and can't find it.

Thanks!

 

[crashguitar]

I don't remember where it was posted but I have this:

 

[ThePanda]

Is the full size Equinox drill template available anywhere? I've searched the threads and can't find it.

Thanks!

(edit: also the above post lol)
I haven't seen a pdf version but this post has a link to the Tayda drill template for a 1590XX and I think I saw some other threads of how to translate the measurements of the Tayda drill template somewhere.

1590XX - PedalPCB Equilux

I just created this Tayda drill template based on the document that @Robert uploaded (see attached). It "should" work but it has not yet been verified. 1/13/23 Edit: @innerlight has confirmed the template with an adjustment to the drill sizes for the rotary switches. The linked template now...

forum.pedalpcb.com

Here are some other resources
Brett said you can message him for a template

Tayda drill template importing to scale in Adobe

I am preparing to make the Equilux. I have the drill template loaded in Tayda. If I use the image of the template from Tayda and paste it into Adobe Illustrator, will it keep the scale correctly? Thanks in advance.

forum.pedalpcb.com

Translating Tayda

Tayda drill template importing to scale in Adobe

I am preparing to make the Equilux. I have the drill template loaded in Tayda. If I use the image of the template from Tayda and paste it into Adobe Illustrator, will it keep the scale correctly? Thanks in advance.

forum.pedalpcb.com

 

[ntuncer]

Precipice looks like the standard 3-knob type 1, Poison Apple looks like the standard 4-knob type 1

The Scenario you can use the same drill template as the Powder Blue (4-knob layout but you drill the center LED hole bigger for the center switch)

https://docs.pedalpcb.com/project/PowderBlue-PedalPCB.pdf

@manfesto to clarify, with the Powder Blue drill template , pots and switch are at the same place? Because led is way lower in front of footswitch.

 

[manfesto]

@manfesto to clarify, with the Powder Blue drill template , pots and switch are at the same place? Because led is way lower in front of footswitch.

LED placement is the same as well (same place it is on the 6-knob layouts too, above the footswitch)

 

[overdriver999]

no rush but the Cannon Fodder docs are still not available MKI & MKII

 

[hendrix1201]

I want to know if the building docs for the XS Drive are going to be available soon Many thanks

Hi

 

[Fontelroy]

Does anyone have a drill template for the Byzantine flanger?

 

[Mbens11]

Does anyone have the schematic for the skeptical buffer by any chance

 

[Cybercow]

Build doc and/or schematic for the SynchroWah?

 

[t1redhands]

Any chance of a schematic for the Hydra delay? Thanks!