vigilante398
Authorized Vendor
Line-level signals don't carry any sort of power worth noting for dissipation, which is why we can get away with using 0.06W rated potentiometers like these 16mm Alpha pots. Even in the plate load resistors we're nowhere near 1/4W of dissipation, which is why I can get away with using 1/8W and 1/10W resistors when I build this circuit in SMD. I promise the resistors are properly rated for this application.I'd probably want larger than 1/4w metal films in the attenuating resistors between gain stages, they're dissipating significant percentages of the signal