Vampire Slayer DIY PCB?

[vigilante398]

`I just checked the PCB to the schematic, component ref's do not match so follow value on PCB's I would say.
27k resistors should be 2 off (R1,R2 on PCB)
47k resistor should be 2 off (R5, R6 on PCB)
1M resistor should be 1 off (R3 on PCB)
All else seems fine to me.
Cheers
Mick

That's fair. In all of my projects in the case of discrepancy between the build doc and the PCB, always follow the PCB, the PCB is always correct.

Designators are a crapshoot because while they are often correct, due to my rampant laziness sometimes things are copied between documents (most notably the power supply schematics) without regard to the actual designators used on the PCB.