What's on the workbench?

So doesn't ring a bell eh?
Control layout makes sense for frequency analyzer, but I thought both versions have at least one 14 or 16 pin ic, plus I wouldn’t know where the vactrol comes into play. Still my best guess, but I wouldn’t at all be surprised to be wrong about it.

Vactrol makes sense for the mold spore expression control, but iirc you said that’s dual gang, so it would have to be a 5-leg vactrol or a pair of ldrs, plus it’s short a few pots.

Definitely not gonkulator.

Can’t remember if there are any other ring mods that might have a vactrol somewhere in the circuit
 
Well you're close.

There's a 14-pin IC in there but it's not the Frequency Analyzer.

This is the ring modulation portion of the Mold Spore, so no dual gang required here. The vactrol is part of the gate for the carrier.
 
It's not in the current layout but I'm considering putting it on a breakout board (or mini daughterboard) so it could optionally be used with this or other projects.
That could be *super* great for the preamp pedals if it’s that much smaller than the UniCab!
 
Back
Top