What's on the workbench?
- Thread starter PedalPCB
- Start date
untamedfrontier
Well-known member
Ran out of 3pdt switches and L78L05 for the Relay Bypass, so I've been stacking up some partial builds on the bench while I wait for parts orders to come in:
Simulcast
Duocast
Calamity Fuzz
Cataclysm Delay
Fuzz Foundry Deluxe
Informant
Simulcast
Duocast
Calamity Fuzz
Cataclysm Delay
Fuzz Foundry Deluxe
Informant
dlazzarini
Well-known member
Danbieranowski
Well-known member
Waiting on that common cathode LED to come in for my Muzzle to wrap that up. Also got a handful of boards today including the Organ Donor, Brown Betty, J’taime, and Graphite Distortion. I need to make a big parts order so I’ll probably only finish the J’taime in the short term since it’s such a small board.
After moving to our new place, my bench has been about the last thing to get setup again. I have crap all over the place but I did manage to dig out the LectricFX DC-Echo I've been working on and get an order put into Smallbear for the last of the parts it's waiting for. Also getting enclosures for my Awful Waffle and Blender boards (that have been built up for ages). I have no idea how I'd use the Blender in my current playing setup but it does scratch an itch for the bizarre career decision of Robin Trower's "Long Misty Days" -era sounds.
Nostradoomus
Well-known member
I am currently at a cabin in the woods so my laptop is my workbench. Doing an (mostly) SMD version of Chuck’s Mojito schematic.
Dreamlands
Active member
I've been very busy and distracted, with a few items on the backburner due to a Canada->US, West to East coast cross continental move.
Otherwise, just messing with the Daisy Seed in anticipation of a Terrarium to plant it in.
Otherwise, just messing with the Daisy Seed in anticipation of a Terrarium to plant it in.
Robert
Reverse Engineer
BurntFingers
Well-known member
Nice work. Can I ask what you used for the tone stack? I'm trying to find a bmt stack to throw into something I'm working on.
Robert
Reverse Engineer
Oh no, that isn't my build. This thread kinda took a left turn from what I intended, but it works so it's all good. ?
I'm posting pics of pedals that are incoming as they're being traced.
That is the Motley Crue 30th Anniversary Dr Feelgood pedal, it was a limited edition run similar to the Steel Panther pedals.
That does sorta look like a bad decal job doesn't it? The UV printing is embossed really thick.
To answer your question though, it's a 3-band baxandall.
Last edited by a moderator:
BurntFingers
Well-known member
Someone somewhere approved that artwork?
Robert
Reverse Engineer
Not at all, that's what the wish list forum is for: https://forum.pedalpcb.com/forums/wish-list.7/
Which one are you wanting?
Robert
Reverse Engineer
Aside from the boost function the Mini Drive is essentially the same circuit, in a 125B enclosure.
And then series into a boost circuit of some description?Aside from the boost function the Mini Drive is essentially the same circuit, in a 125B enclosure.
