Cybercow
Well-known member
Are the SynchroWah and SynchroTrem build docs and PCBs coming soon?
What's on the workbench?
- Thread starter PedalPCB
- Start date
darwin999
Well-known member
What's on the workbench?
@Robert don't release the schematic so no one else steals your pedal and passes it off as their work. Be petty AF 💅 💅 💅
forum.pedalpcb.com
@Robert - I hope your tracing of that FTT Overdriveland was successful, definitely on my watch list!
Guardians of the analog
Papi Fuego
So are the BBD and clock chips on the back side of the board?
I don't understand how this makes a latte.
I imagine you’re up to your neck in builds but from what I remember reading on the Darkglass Omicron it’s (supposedly) emulating a Blackstone MOSFET into a Boss ODB-3, Jon Stockman’s bread and butter for a while
I’d love to know what the two distortion circuits look like in the omicron, as I no longer have a unit that I can take a peek inside of
Bricksnbeatles
Member known well
Ooh! Something I’ll actually use a lot!
I’m assuming the footswitch cycles between which expression out is active— how is the inactive state set? Always low/high? Last recalled expression value? Or is it configurable via some sort of long hold or double tap feature of the foot switch?
When is this one expected to hit the store?
Robert
Reverse Engineer
All three outputs are simultaneously active, only one is controlled by the expression input jack at a time. (Selected by the footswitch)
I haven't set their initial power-on inactive states yet, they just default to zero at power on at the moment... Once powered on though, all outputs hold their position regardless of whether they're active or not.
It should be here within the next couple weeks.
giovanni
Well-known member
So you can set a value with the expression pedal, then switch output and set the next value? Nice!All three outputs are simultaneously active, only one is controlled by the expression input jack at a time. (Selected by the footswitch)
I haven't set their initial power-on inactive states yet, they just default to zero at power on at the moment... Once powered on though, all outputs hold their position regardless of whether they're active or not.
It should be here within the next couple weeks.
Robert
Reverse Engineer
Bricksnbeatles
Member known well
Awesome! That’s exactly what I was hoping as far as holding position— just worded it kinda funkyAll three outputs are simultaneously active, only one is controlled by the expression input jack at a time. (Selected by the footswitch)
I haven't set their initial power-on inactive states yet, they just default to zero at power on at the moment... Once powered on though, all outputs hold their position regardless of whether they're active or not.
It should be here within the next couple weeks.
benny_profane
Well-known member
How’re those caps looking?
Probably a double version in a cream enclosure.
temol
Well-known member
giovanni
Well-known member
Some sort of FET preamp?
Nostradoomus
Well-known member
it's a vs audio platinum right
at least it's not a guvnor, looking at you alexander pedals
at least it's not a guvnor, looking at you alexander pedals
Robert
Reverse Engineer
Yep.
Just wrapping up the code while waiting on more microcontrollers to arrive...
