Rocket Sockets

[chongmagic]

I just ordered some of these, has anyone tried them yet?

Rocket Sockets – Pedal Hardware Tool | Pepers' Pedals

Rocket Sockets by Pepers' Pedals (Peppers Pedals) help you tighten and secure pedal hardware for reliable performance.

peperspedals.bigcartel.com

 

[Robusto]

Yep. I've had a set for a while and love them! Good stuff.

 

[Nostradoomus]

Once a dealer in Canada has them I will! Although it is quite cheap to just order them from pepers with exchange rate...

 

[chongmagic]

Love My Switches will have them soon.

 

[zgrav]

looked like they were already in stock at LMSwitches when I placed an order last weekend.

 

[music6000]

They look Great, it would be Good if they were different colours.
Permanent Markers would fix that!

 

[BurntFingers]

Yep I've had a couple. They don't last. The plastic is soft and just gets chewed up by tightening the metal nuts on pedals. I've been using a multitool for a while since I threw these out.

 

[Robert]

They do look convenient. I talked with Pepers about possibly getting some in stock a while back but other tasks took priority...

Personally I don't have any issues using metal sockets.

I keep a set of color coded deep sockets from Harbor Freight in metric and SAE on my bench. Normally I just use them by hand, but I have a little mini ratchet there when needed. Been meaning to pick up a thumbwheel ratchet but just never think about it when I'm in the store.

 

[BurntFingers]

I'm surprised nobody has made something like a multitool for bikes or skateboards except for pedal use. Basically a metal cross with each end ending in the right size socket.

 

[K Pedals]

They do look convenient. I talked with Pepers about possibly getting some in stock a while back but other tasks took priority...

Personally I don't have any issues using metal sockets.

I keep a set of color coded deep sockets from Harbor Freight in metric and SAE on my bench. Normally I just use them by hand, but I have a little mini ratchet there when needed. Been meaning to pick up a thumbwheel ratchet but just never think about it when I'm in the store.

View attachment 2857

Yeah that’s exactly what I use...

 

[jubal81]

I bought a set a while back and found that a little adjustable wrench is a lot faster and easier to keep up with.

 

[Chuck D. Bones]

All of the nuts on my pedals have washers, so marring the paint is not a problem. I use nut drivers for everything except stomp switch nuts and the inside nuts on power jacks. For those, I use a deep socket and tiny crescent wrench, respectively.

 

[music6000]

All of the nuts on my pedals have washers, so marring the paint is not a problem. I use nut drivers for everything except stomp switch nuts and the inside nuts on power jacks. For those, I use a deep socket and tiny crescent wrench, respectively.

Same Here, SIDCHROME - Most Famous Tool Company in Australia, Cost $30.00 as New used in a Pawn Shop. Normally $60.00.
Metric & Imperial Sockets with Screwdriver style 1/4'' Drive.
Long extension Drive under Screwdriver :

 

[Mourguitars]

I like those ! I'll order them on my next order...i like tools anyway

Been using painters tape on these

Mike

https://imgur.com/DMwDJS1

 

[mywmyw]

They do look convenient. I talked with Pepers about possibly getting some in stock a while back but other tasks took priority...

Personally I don't have any issues using metal sockets.

I keep a set of color coded deep sockets from Harbor Freight in metric and SAE on my bench. Normally I just use them by hand, but I have a little mini ratchet there when needed. Been meaning to pick up a thumbwheel ratchet but just never think about it when I'm in the store.

View attachment 2857

i have the thumbwheel ratchet set and ive never cared for it, unless you can get one with a button for releasing the socket. i much prefer the swivel head ratchet. easy to go from tightening to rapid turning, and then pop the socket off if need be.

 

[Dirty_Boogie]

These four pretty much cover everything for me...

 

[Chuck D. Bones]

Harbor Freight! Did you get the free flashlight?

 

[Dirty_Boogie]

Harbor Freight! Did you get the free flashlight?

.... and free tape measure, and free screwdriver, and lots of other junk that I just can't live without! ?

 

[Ginsly]

Old thread! Was considering these since scratching does happen from time to time...

@BurntFingers So these didn't last for you, huh?

Anyone else have experience with these or a plastic alternative? I have the MusicNomad Octopus, but it's missing some sizes:

 

[pricklyrobot]

Re: Rocket Sockets, it says this on their website:
“Injection molded in Dunedin, NZ using 15% Glass fibre reinforced Nylon, the latest version of these nifty little tools are far superior to the previous 3D printed ones”.
Sounds like they changed their process/materials at some point, so maybe some folks were commenting on the older version?

I have some that I bought relatively recently. They seem sturdy enough so far, but I haven’t used them a ton.